The shortage of water due to water resources rapidly drying up has made water conservation a primary concern for everyone. If you are a homeowner, you might want to go high-tech in order to save water. One way to do this is to install an automatic tap in your bathroom or kitchen sink. This battery-powered or hard-wired fixture uses a sensor to turn on the water. The sensor, which is usually located at the mid-lower part of the spigot, transmits an invisible beam of infrared rays. When the beam is broken as you place your hands under the spigot, the tap automatically releases water. When you remove your hands, the beam becomes continuous again and shuts off the water.
An automatic tap provides lots of benefits. For example, it is easy to operate because you do not need to turn a knob or pull a lever to turn the water on or off. Also, you do not need to touch anything on the fixture itself thus preventing the spread of harmful pathogens.
Maintaining an automatic tap is quite easy. By gently wiping the sensor with a soft cloth, you can keep the fixture operating at optimal capacity. Furthermore, since there are no moving parts, you do not need to worry about replacing valves, levers, and knobs that are damaged because of improper use or normal wear and tear. Best of all, you can prevent water overflow, saving you water and money. In fact, on an average, these devices can cut back 30 percent of your water bills. Finally, these high-tech fixtures come in attractive and neat contemporary designs so you can say goodbye to those ugly, archaic-looking spigots.